This is mostly EXTRA_DIST, but also includes some headers.
I had to drill down into test because "make dist" builds some
of the test code. .gitignore is not included in the tarballs.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@755791 13f79535-47bb-0310-9956-ffa450edef68
This was a feature designed to allow a Thrift server to report
information about its interface. However, the feature has
significant design problems, and is presence is currently causing
confusion without doing any good. Therefore, it is being removed.
It will always be in source control if and when we are ready to
come back to it.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@741824 13f79535-47bb-0310-9956-ffa450edef68
This function didn't work properly when used outside of the Thrift library
because config.h isn't available. This patch fixes the issue by moving
the function definition into the library.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@675819 13f79535-47bb-0310-9956-ffa450edef68
- Clean up lib/cpp/Makefile.am to use AM_CXXFLAGS etc instead of
target-specific so we can take advantage of default flags.
- Use top_builddir in a few places instead of top_srcdir.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@666489 13f79535-47bb-0310-9956-ffa450edef68
The old implementations of the memory-based transports (TBufferedTransport,
TFramedTransport, and TMemoryBuffer) shared very little code and all worked
a bit differently. This change unifies them all as subclasses of a single
base (TBufferBase) which handles the fast-path operations (when requests
can be satisfied by the buffer) with inline methods (that will eventually
be made nonvirtual in the template branch) and calls out to pure-virutal
methods to handle full/empty buffers. All of the buffer-management is now
done in terms of "base and bound" pointers rather than "pos" integers.
These classes were moved to TBufferTransports.{h,cpp}. The .h is included
in TTransportUtils for backwards compatibility.
Also added a "TShortReadTransport" to assist testing transports.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665676 13f79535-47bb-0310-9956-ffa450edef68
Summary:
This change adds a new and exciting protocol to Thrift. It uses
RFC-compliant JSON as the wire protocol and is fully human readable.
(once a little whitespace has been inserted.) Unlike the existing
JSON protocol for Java, which is intended to allow Thrift data to be
transferred to scripting languages, this protocol is lossless and fully
read-write. It was written by Chad Walters of Powerset and reviewed
by David Reiss.
Tested by running make check.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665482 13f79535-47bb-0310-9956-ffa450edef68
Summary:
- Expanded tabs to spaces where spaces were the norm.
- Deleted almost all trailing whitespace.
- Added newlines to the ends of a few files.
- Ran dos2unix on one file or two.
Reviewed By: mcslee
Test Plan: git diff -b
Revert Plan: ok
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665467 13f79535-47bb-0310-9956-ffa450edef68
Summary:
Ben Maurer suggested that it would make sense for Thrift to build as
a single project, with one configure.ac and multiple Makefile.am.
He was also kind enough to do the heavy lifting, and this commit
is the application of his patch (with minor modifications).
The most significant visible change from this diff is that
in order to buidl one of the thrift sub-projects (i.e.: the compiler,
the C++ library, or the Python library) you must run bootstrap.sh
and configure in the Thrift root, then make in the specific project.
Users who want to build and install the Python library but
can't run configure because they don't have Boost can simply
run setup.py directly.
Reviewed By: mcslee
Test Plan: Built Thrift from scratch.
Revert Plan: ok
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665409 13f79535-47bb-0310-9956-ffa450edef68
Summary:
- make dist is no fun. Had to add a lot of stuff to Makefile.am to
make sure stuff got included in the tarball.
- Added a permanent NEWS file with the release notes for this release.
- clean.sh removes ylwrap also.
- Gave it a real version for make dist.
- Added ACLOCAL_AMFLAGS to lib/cpp/Makefile.am to make it easier to
work on configure.ac.
- Made concurrency_test a non-installed binary because
no one wants to install it.
- Dropped some symlinks that were annoying make dist.
- Updated README.
Test Plan:
./bootstrap.sh && ./configure && make dist
Compared contents of tarball to source tree.
Did this from a fresh git tree so no gross untracked files would be around.
On devrs: ./bootstrap.sh && ./configure && make install DESTDIR=/tmp/relinst1
Made sure concurrency_test was built but not installed.
Checked zlib URL with firefox.
Reviewed By: mcslee
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665274 13f79535-47bb-0310-9956-ffa450edef68
Summary:
Same as the last (reverted) zlib patch,
but this time with way more awesome support for building
with no zlib headers installed.
Reviewed By: mcslee
Test Plan:
- Did lots of really pathological stuff in my VMware.
- On devrs004:
./bootstrap.sh && ./configure && make && make install DESTDIR=/tmp/tzinst && echo "Yay"
Revert Plan: ok
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665269 13f79535-47bb-0310-9956-ffa450edef68
Summary:
- Totally re-did the libevent check.
- Thrift now compiles and instals cleanly without libevent.
- (libevent is still needed to build libthriftnb.)
Reviewed By: mcslee
Test Plan:
- Ran configure and make in various configurations in my VMware.
- Clean build and install of Thrift on devrs004 (into /tmp).
Revert Plan: ok
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665267 13f79535-47bb-0310-9956-ffa450edef68
Summary:
Add a new transport to the C++ library: TZLibTransport.
This wraps another transport (just like TBufferedTransport),
compresses the data written to it, and uncompresses the data it reads.
Reviewed By: mcslee
Test Plan:
For ax_lib_zlib.m4
- Ran ./bootstrap.sh.
- Looked at configure.
- Ran ./configure.
- Looked at config.status
- Ran ./configure --with-zlib=/usr.
- Looked at config.status
- Changed configure.ac to AC_LIB_ZLIB(1.2.4)
- Ran ./configure.
- Watched it fail.
For TZlibTransport
- test/ZlibTest.cpp
- Code coverage (hotness) report sent with review.
- 100% line coverage for all the good stuff.
Revert Plan: ok
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665262 13f79535-47bb-0310-9956-ffa450edef68
Summary:
- Made some stuff in TBinaryProtocol protected instead of private.
- Added a preliminary version of TDenseProtocol. This is still
super highly experimental and gross, and I wrote a super scary
comment to explain that to anyone foolish enough to try to use
this in its current state.
Reviewed By: mcslee
Test Plan: test/DenseProtoTest.cpp
Revert Plan: ok
Memcache Impact:
Save memory if/when people use it.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665247 13f79535-47bb-0310-9956-ffa450edef68
Summary:
The Thrift compiler now generates static methods for every service to generate
a reflection of the methods provided by the service. This reflection is fairly
limited, but should be enough for what we want to do with SMC.
Reviewed By: mcslee
Test Plan: test/ReflectionTest.cpp
Revert Plan: ok
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665226 13f79535-47bb-0310-9956-ffa450edef68
Summary:
Someone thought it would be a good idea to have two different signatures
for strerror_r, with subtly different semantics (strlcpy = smart).
We now work properly with either of them.
Also fixed a test to work on 32-bit, you sloppy <expletive>s.
Reviewed By: mcslee
Test Plan:
Rebuild thrift.
Force one of these errors to be thrown.
Revert Plan: ok
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665215 13f79535-47bb-0310-9956-ffa450edef68
Summary:
Added TDebugProtocol, a write-only Thrift protocol for C++
that produces human-readable representations of thrift structs.
Trac Bug: #
Blame Rev:
Reviewed By: mcslee
Test Plan:
Recompiled Thrift.
./test/TestDebugProto.* see compile instructions at the top.
Ran that, and it looked good.
Revert Plan:
grep TDebugProtocol <world>
grep ThriftDebugString <world>
Revert or comment out whatever you find so that they still compile.
Then svn revert.
Notes:
EImportant:
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665166 13f79535-47bb-0310-9956-ffa450edef68
- StatsProcessor can be used to print events, or keep track of event frequency
- PeekProcessor is used to examine data in a thrift event, prior to passing it along to an underlying processor
- TPipedFileReaderTransport and its factory are used to pipe a TFileReaderTransport (which TFileProcessor requires)
Also fixed some bugs in TFileTransport - next flush time was overflowing and not always being reset
Reviewed by: aditya, mcslee
Test Plan: Tested using various thrift clients (scribe, falcon) and gdb in sandbox and on dev008.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665066 13f79535-47bb-0310-9956-ffa450edef68
Summary: Add application exceptions for unknown methods etc, and also let binary protocol support size limits on containers and strings
Reviewed By: aditya, xp-wayne
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@665003 13f79535-47bb-0310-9956-ffa450edef68
Summary: libthriftnb is the one that requires libevent. It was really annoying that you always had to put -levent in your link step to build thrift programs when youa re not using any of the c++ nonblocking stuff. This way, if you're using nonblocking you can do that, but the normal case is easier to link.
Reviewed By: makefile
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@664951 13f79535-47bb-0310-9956-ffa450edef68
Summary:
-- This is the thrifty version of Pillar's batch_writer
-- Cleaned up a lot of the code in batch writer and made it conform to Thrift's strict coding standards
-- Added TBufferedRouterTransport.h/cc to actually route messsages via readEnd() to the file writer. It's
not quite as easy to route the messages in Thrift as it was in Pillar
Reviewed By: Slee
Test Plan: Tested by making sure that the file was recording data
Notes:
-- The real correctness test will be when I finish writing TLogFileTransport (pillar_logfile.cpp).
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@664826 13f79535-47bb-0310-9956-ffa450edef68
Summary: Servers need to create bufferedtransports etc. around the transports they get in a user-definable way. So use a factory pattern to allow the user to supply an object to the server that defines this behavior.
git-svn-id: https://svn.apache.org/repos/asf/incubator/thrift/trunk@664792 13f79535-47bb-0310-9956-ffa450edef68
