.. _faq: Frequently Asked Questions ========================== .. contents:: FAQ Is Salt open-core? ------------------ No. Salt is 100% committed to being open-source, including all of our APIs. It is developed under the `Apache 2.0 license`_, allowing it to be used in both open and proprietary projects. To expand on this a little: There is much argument over the actual definition of "open core". From our standpoint, Salt is open source because 1. It is a standalone product that anyone is free to use. 2. It is developed in the open with contributions accepted from the community for the good of the project. 3. There are no features of Salt itself that are restricted to separate proprietary products distributed by SaltStack, Inc. 4. Because of our Apache 2.0 license, Salt can be used as the foundation for a project or even a proprietary tool. 5. Our APIs are open and documented (any lack of documentation is an oversight as opposed to an intentional decision by SaltStack the company) and available for use by anyone. SaltStack the company does make proprietary products which use Salt and its libraries, like company is free to do, but we do so via the APIs, NOT by forking Salt and creating a different, closed-source version of it for paying customers. .. _`Apache 2.0 license`: http://www.apache.org/licenses/LICENSE-2.0.html I think I found a bug! What should I do? ----------------------------------------- The salt-users mailing list as well as the salt IRC channel can both be helpful resources to confirm if others are seeing the issue and to assist with immediate debugging. To report a bug to the Salt project, please follow the instructions in :doc:`reporting a bug `. What ports should I open on my firewall? ---------------------------------------- Minions need to be able to connect to the Master on TCP ports 4505 and 4506. Minions do not need any inbound ports open. More detailed information on firewall settings can be found :doc:`here `. I'm seeing weird behavior (including but not limited to packages not installing their users properly) ----------------------------------------------------------------------------------------------------- This is often caused by SELinux. Try disabling SELinux or putting it in permissive mode and see if the weird behavior goes away. My script runs every time I run a *state.apply*. Why? ----------------------------------------------------- You are probably using :mod:`cmd.run ` rather than :mod:`cmd.wait `. A :mod:`cmd.wait ` state will only run when there has been a change in a state that it is watching. A :mod:`cmd.run ` state will run the corresponding command *every time* (unless it is prevented from running by the ``unless`` or ``onlyif`` arguments). More details can be found in the documentation for the :mod:`cmd ` states. When I run *test.ping*, why don't the Minions that aren't responding return anything? Returning ``False`` would be helpful. --------------------------------------------------------------------------------------------------------------------------- When you run *test.ping* the Master tells Minions to run commands/functions, and listens for the return data, printing it to the screen when it is received. If it doesn't receive anything back, it doesn't have anything to display for that Minion. There are a couple options for getting information on Minions that are not responding. One is to use the verbose (``-v``) option when you run salt commands, as it will display "Minion did not return" for any Minions which time out. .. code-block:: bash salt -v '*' pkg.install zsh Another option is to use the :mod:`manage.down ` runner: .. code-block:: bash salt-run manage.down Also, if the Master is under heavy load, it is possible that the CLI will exit without displaying return data for all targeted Minions. However, this doesn't mean that the Minions did not return; this only means that the Salt CLI timed out waiting for a response. Minions will still send their return data back to the Master once the job completes. If any expected Minions are missing from the CLI output, the :mod:`jobs.list_jobs ` runner can be used to show the job IDs of the jobs that have been run, and the :mod:`jobs.lookup_jid ` runner can be used to get the return data for that job. .. code-block:: bash salt-run jobs.list_jobs salt-run jobs.lookup_jid 20130916125524463507 If you find that you are often missing Minion return data on the CLI, only to find it with the jobs runners, then this may be a sign that the :conf_master:`worker_threads` value may need to be increased in the master config file. Additionally, running your Salt CLI commands with the ``-t`` option will make Salt wait longer for the return data before the CLI command exits. For instance, the below command will wait up to 60 seconds for the Minions to return: .. code-block:: bash salt -t 60 '*' test.ping How does Salt determine the Minion's id? ---------------------------------------- If the Minion id is not configured explicitly (using the :conf_minion:`id` parameter), Salt will determine the id based on the hostname. Exactly how this is determined varies a little between operating systems and is described in detail :ref:`here `. I'm trying to manage packages/services but I get an error saying that the state is not available. Why? ------------------------------------------------------------------------------------------------------ Salt detects the Minion's operating system and assigns the correct package or service management module based on what is detected. However, for certain custom spins and OS derivatives this detection fails. In cases like this, an issue should be opened on our tracker_, with the following information: 1. The output of the following command: .. code-block:: bash salt grains.items | grep os 2. The contents of ``/etc/lsb-release``, if present on the Minion. .. _tracker: https://github.com/saltstack/salt/issues Why aren't my custom modules/states/etc. available on my Minions? ----------------------------------------------------------------- Custom modules are synced to Minions when :mod:`saltutil.sync_modules `, or :mod:`saltutil.sync_all ` is run. Custom modules are also synced by :mod:`state.apply` when run without any arguments. Similarly, custom states are synced to Minions when :mod:`state.apply `, :mod:`saltutil.sync_states `, or :mod:`saltutil.sync_all ` is run. Custom states are also synced by :mod:`state.apply` when run without any arguments. Other custom types (renderers, outputters, etc.) have similar behavior, see the documentation for the :mod:`saltutil ` module for more information. Module ``X`` isn't available, even though the shell command it uses is installed. Why? -------------------------------------------------------------------------------------- This is most likely a PATH issue. Did you custom-compile the software which the module requires? RHEL/CentOS/etc. in particular override the root user's path in ``/etc/init.d/functions``, setting it to ``/sbin:/usr/sbin:/bin:/usr/bin``, making software installed into ``/usr/local/bin`` unavailable to Salt when the Minion is started using the initscript. In version 2014.1.0, Salt will have a better solution for these sort of PATH-related issues, but recompiling the software to install it into a location within the PATH should resolve the issue in the meantime. Alternatively, you can create a symbolic link within the PATH using a :mod:`file.symlink ` state. .. code-block:: yaml /usr/bin/foo: file.symlink: - target: /usr/local/bin/foo Can I run different versions of Salt on my Master and Minion? ------------------------------------------------------------- This depends on the versions. In general, it is recommended that Master and Minion versions match. When upgrading Salt, the master(s) should always be upgraded first. Backwards compatibility for minions running newer versions of salt than their masters is not guaranteed. Whenever possible, backwards compatibility between new masters and old minions will be preserved. Generally, the only exception to this policy is in case of a security vulnerability. Recent examples of backwards compatibility breakage include the 0.17.1 release (where all backwards compatibility was broken due to a security fix), and the 2014.1.0 release (which retained compatibility between 2014.1.0 masters and 0.17 minions, but broke compatibility for 2014.1.0 minions and older masters). Does Salt support backing up managed files? ------------------------------------------- Yes. Salt provides an easy to use addition to your file.managed states that allow you to back up files via :doc:`backup_mode `, backup_mode can be configured on a per state basis, or in the minion config (note that if set in the minion config this would simply be the default method to use, you still need to specify that the file should be backed up!). Is it possible to deploy a file to a specific minion, without other minions having access to it? ------------------------------------------------------------------------------------------------ The Salt fileserver does not yet support access control, but it is still possible to do this. As of Salt 2015.5.0, the :mod:`file_tree ` external pillar is available, and allows the contents of a file to be loaded as Pillar data. This external pillar is capable of assigning Pillar values both to individual minions, and to :ref:`nodegroups `. See the :mod:`documentation ` for details on how to set this up. Once the external pillar has been set up, the data can be pushed to a minion via a :py:func:`file.managed ` state, using the ``contents_pillar`` argument: .. code-block:: yaml /etc/my_super_secret_file: file.managed: - user: secret - group: secret - mode: 600 - contents_pillar: secret_files:my_super_secret_file In this example, the source file would be located in a directory called ``secret_files`` underneath the file_tree path for the minion. The syntax for specifying the pillar variable is the same one used for :py:func:`pillar.get `, with a colon representing a nested dictionary. .. warning:: Deploying binary contents using the :py:func:`file.managed ` state is only supported in Salt 2015.8.4 and newer. What is the best way to restart a Salt daemon using Salt? --------------------------------------------------------- Updating the salt-minion package requires a restart of the salt-minion service. But restarting the service while in the middle of a state run interrupts the process of the minion running states and sending results back to the master. It's a tricky problem to solve, and we're working on it, but in the meantime one way of handling this (on Linux and UNIX-based operating systems) is to use **at** (a job scheduler which predates cron) to schedule a restart of the service. **at** is not installed by default on most distros, and requires a service to be running (usually called **atd**) in order to schedule jobs. Here's an example of how to upgrade the salt-minion package at the end of a Salt run, and schedule a service restart for one minute after the package update completes. Linux/Unix ********** .. code-block:: yaml salt-minion: pkg.installed: - name: salt-minion - version: 2014.1.7-3.el6 - order: last service.running: - name: salt-minion - require: - pkg: salt-minion cmd.run: - name: echo service salt-minion restart | at now + 1 minute - onchanges: - pkg: salt-minion To ensure that **at** is installed and **atd** is running, the following states can be used (be sure to double-check the package name and service name for the distro the minion is running, in case they differ from the example below. .. code-block:: yaml at: pkg.installed: - name: at service.running: - name: atd - enable: True An alternative to using the :program:`atd` daemon is to fork and disown the process. .. code-block:: yaml restart_minion: cmd.run: - name: | exec 0>&- # close stdin exec 1>&- # close stdout exec 2>&- # close stderr nohup /bin/sh -c 'sleep 10 && salt-call --local service.restart salt-minion' & - python_shell: True - order: last Windows ******* For Windows machines, restarting the minion can be accomplished using the following state: .. code-block:: yaml schedule-start: cmd.run: - name: 'start powershell "Restart-Service -Name salt-minion"' - order: last or running immediately from the command line: .. code-block:: bash salt -G kernel:Windows cmd.run 'start powershell "Restart-Service -Name salt-minion"' Salting the Salt Master ----------------------- In order to configure a master server via states, the Salt master can also be "salted" in order to enforce state on the Salt master as well as the Salt minions. Salting the Salt master requires a Salt minion to be installed on the same machine as the Salt master. Once the Salt minion is installed, the minion configuration file must be pointed to the local Salt master: .. code-block:: yaml master: 127.0.0.1 Once the Salt master has been "salted" with a Salt minion, it can be targeted just like any other minion. If the minion on the salted master is running, the minion can be targeted via any usual ``salt`` command. Additionally, the ``salt-call`` command can execute operations to enforce state on the salted master without requiring the minion to be running. More information about salting the Salt master can be found in the salt-formula for salt itself: https://github.com/saltstack-formulas/salt-formula .. _faq-grain-security: Is Targeting using Grain Data Secure? ------------------------------------- Because grains can be set by users that have access to the minion configuration files on the local system, grains are considered less secure than other identifiers in Salt. Use caution when targeting sensitive operations or setting pillar values based on grain data. The only grain which can be safely used is ``grains['id']`` which contains the Minion ID. When possible, you should target sensitive operations and data using the Minion ID. If the Minion ID of a system changes, the Salt Minion's public key must be re-accepted by an administrator on the Salt Master, making it less vulnerable to impersonation attacks. Why Did the Value for a Grain Change on Its Own? ------------------------------------------------ This is usually the result of an upstream change in an OS distribution that replaces or removes something that Salt was using to detect the grain. Fortunately, when this occurs, you can use Salt to fix it with a command similar to the following: .. code-block:: bash salt -G 'grain:ChangedValue' grains.setvals "{'grain': 'OldValue'}" (Replacing *grain*, *ChangedValue*, and *OldValue* with the grain and values that you want to change / set.) You should also `file an issue `_ describing the change so it can be fixed in Salt.