.. _configuration-salt-master: =========================== Configuring the Salt Master =========================== The Salt system is amazingly simple and easy to configure, the two components of the Salt system each have a respective configuration file. The :command:`salt-master` is configured via the master configuration file, and the :command:`salt-minion` is configured via the minion configuration file. .. seealso:: :ref:`example master configuration file ` The configuration file for the salt-master is located at :file:`/etc/salt/master` by default. A notable exception is FreeBSD, where the configuration file is located at :file:`/usr/local/etc/salt`. The available options are as follows: Primary Master Configuration ============================ .. conf_master:: interface ``interface`` ------------- Default: ``0.0.0.0`` (all interfaces) The local interface to bind to. .. code-block:: yaml interface: 192.168.0.1 .. conf_master:: ipv6 ``ipv6`` -------- Default: ``False`` Whether the master should listen for IPv6 connections. If this is set to True, the interface option must be adjusted too (for example: "interface: '::'") .. code-block:: yaml ipv6: True .. conf_master:: publish_port ``publish_port`` ---------------- Default: ``4505`` The network port to set up the publication interface. .. code-block:: yaml publish_port: 4505 .. conf_master:: master_id ``master_id`` ---------------- Default: ``None`` The id to be passed in the publish job to minions. This is used for MultiSyndics to return the job to the requesting master. .. note:: This must be the same string as the syndic is configured with. .. code-block:: yaml master_id: MasterOfMaster .. conf_master:: user ``user`` -------- Default: ``root`` The user to run the Salt processes .. code-block:: yaml user: root .. conf_master:: max_open_files ``max_open_files`` ------------------ Default: ``100000`` Each minion connecting to the master uses AT LEAST one file descriptor, the master subscription connection. If enough minions connect you might start seeing on the console(and then salt-master crashes): .. code-block:: bash Too many open files (tcp_listener.cpp:335) Aborted (core dumped) .. code-block:: yaml max_open_files: 100000 By default this value will be the one of `ulimit -Hn`, i.e., the hard limit for max open files. To set a different value than the default one, uncomment, and configure this setting. Remember that this value CANNOT be higher than the hard limit. Raising the hard limit depends on the OS and/or distribution, a good way to find the limit is to search the internet for something like this: .. code-block:: text raise max open files hard limit debian .. conf_master:: worker_threads ``worker_threads`` ------------------ Default: ``5`` The number of threads to start for receiving commands and replies from minions. If minions are stalling on replies because you have many minions, raise the worker_threads value. Worker threads should not be put below 3 when using the peer system, but can drop down to 1 worker otherwise. .. note:: When the master daemon starts, it is expected behaviour to see multiple salt-master processes, even if 'worker_threads' is set to '1'. At a minimum, a controlling process will start along with a Publisher, an EventPublisher, and a number of MWorker processes will be started. The number of MWorker processes is tuneable by the 'worker_threads' configuration value while the others are not. .. code-block:: yaml worker_threads: 5 .. conf_master:: ret_port ``ret_port`` ------------ Default: ``4506`` The port used by the return server, this is the server used by Salt to receive execution returns and command executions. .. code-block:: yaml ret_port: 4506 .. conf_master:: pidfile ``pidfile`` ----------- Default: ``/var/run/salt-master.pid`` Specify the location of the master pidfile. .. code-block:: yaml pidfile: /var/run/salt-master.pid .. conf_master:: root_dir ``root_dir`` ------------ Default: :file:`/` The system root directory to operate from, change this to make Salt run from an alternative root. .. code-block:: yaml root_dir: / .. note:: This directory is prepended to the following options: :conf_master:`pki_dir`, :conf_master:`cachedir`, :conf_master:`sock_dir`, :conf_master:`log_file`, :conf_master:`autosign_file`, :conf_master:`autoreject_file`, :conf_master:`pidfile`. .. conf_master:: pki_dir ``pki_dir`` ----------- Default: :file:`/etc/salt/pki` The directory to store the pki authentication keys. .. code-block:: yaml pki_dir: /etc/salt/pki .. conf_master:: extension_modules ``extension_modules`` --------------------- Directory for custom modules. This directory can contain subdirectories for each of Salt's module types such as "runners", "output", "wheel", "modules", "states", "returners", etc. This path is appended to :conf_master:`root_dir`. .. code-block:: yaml extension_modules: srv/modules .. conf_master:: cachedir ``cachedir`` ------------ Default: :file:`/var/cache/salt` The location used to store cache information, particularly the job information for executed salt commands. .. code-block:: yaml cachedir: /var/cache/salt .. conf_master:: verify_env ``verify_env`` -------------- Default: ``True`` Verify and set permissions on configuration directories at startup. .. code-block:: yaml verify_env: True .. conf_master:: keep_jobs ``keep_jobs`` ------------- Default: ``24`` Set the number of hours to keep old job information. .. conf_master:: timeout ``timeout`` ----------- Default: ``5`` Set the default timeout for the salt command and api. .. conf_master:: loop_interval ``loop_interval`` ----------------- Default: ``60`` The loop_interval option controls the seconds for the master's maintenance process check cycle. This process updates file server backends, cleans the job cache and executes the scheduler. .. conf_master:: output ``output`` ---------- Default: ``nested`` Set the default outputter used by the salt command. .. conf_master:: color ``color`` --------- Default: ``True`` By default output is colored, to disable colored output set the color value to False. .. code-block:: yaml color: False .. conf_master:: sock_dir ``sock_dir`` ------------ Default: :file:`/var/run/salt/master` Set the location to use for creating Unix sockets for master process communication. .. code-block:: yaml sock_dir: /var/run/salt/master .. conf_master:: enable_gpu_grains ``enable_gpu_grains`` --------------------- Default: ``False`` The master can take a while to start up when lspci and/or dmidecode is used to populate the grains for the master. Enable if you want to see GPU hardware data for your master. .. conf_master:: job_cache ``job_cache`` ------------- Default: ``True`` The master maintains a job cache, while this is a great addition it can be a burden on the master for larger deployments (over 5000 minions). Disabling the job cache will make previously executed jobs unavailable to the jobs system and is not generally recommended. Normally it is wise to make sure the master has access to a faster IO system or a tmpfs is mounted to the jobs dir. .. conf_master:: minion_data_cache ``minion_data_cache`` --------------------- Default: ``True`` The minion data cache is a cache of information about the minions stored on the master, this information is primarily the pillar and grains data. The data is cached in the Master cachedir under the name of the minion and used to predetermine what minions are expected to reply from executions. .. code-block:: yaml minion_data_cache: True .. conf_master:: ext_job_cache ``ext_job_cache`` ----------------- Default: ``''`` Used to specify a default returner for all minions, when this option is set the specified returner needs to be properly configured and the minions will always default to sending returns to this returner. This will also disable the local job cache on the master. .. code-block:: yaml ext_job_cache: redis .. conf_master:: event_return ``event_return`` ----------------- .. versionadded:: 2015.2.0 Default: ``''`` Specify the returner to use to log events. A returner may have installation and configuration requirements. Read the returner's documentation. .. note:: Not all returners support event returns. Verify that a returner has an ``event_return()`` function before configuring this option with a returner. .. code-block:: yaml event_return: cassandra_cql .. conf_master:: master_job_cache ``master_job_cache`` -------------------- .. versionadded:: 2014.7 Default: 'local_cache' Specify the returner to use for the job cache. The job cache will only be interacted with from the salt master and therefore does not need to be accessible from the minions. .. code-block:: yaml master_job_cache: redis .. conf_master:: enforce_mine_cache ``enforce_mine_cache`` ---------------------- Default: False By-default when disabling the minion_data_cache mine will stop working since it is based on cached data, by enabling this option we explicitly enabling only the cache for the mine system. .. code-block:: yaml enforce_mine_cache: False .. conf_master:: max_minions ``max_minions`` --------------- Default: 0 The number of minions the master should allow to connect. Use this to accommodate the number of minions per master if you have different types of hardware serving your minions. The default of ``0`` means unlimited connections. Please note, that this can slow down the authentication process a bit in large setups. .. code-block:: yaml max_minions: 100 ``con_cache`` ------------- Default: False If max_minions is used in large installations, the master might experience high-load situations because of having to check the number of connected minions for every authentication. This cache provides the minion-ids of all connected minions to all MWorker-processes and greatly improves the performance of max_minions. .. code-block:: yaml con_cache: True .. conf_master:: presence_events ``presence_events`` ---------------------- Default: False Causes the master to periodically look for actively connected minions. :ref:`Presence events ` are fired on the event bus on a regular interval with a list of connected minions, as well as events with lists of newly connected or disconnected minions. This is a master-only operation that does not send executions to minions. Note, this does not detect minions that connect to a master via localhost. .. code-block:: yaml presence_events: False .. conf_master:: roster_file ``roster_file`` --------------- Default: '/etc/salt/roster' Pass in an alternative location for the salt-ssh roster file. .. code-block:: yaml roster_file: /root/roster Master Security Settings ======================== .. conf_master:: open_mode ``open_mode`` ------------- Default: ``False`` Open mode is a dangerous security feature. One problem encountered with pki authentication systems is that keys can become "mixed up" and authentication begins to fail. Open mode turns off authentication and tells the master to accept all authentication. This will clean up the pki keys received from the minions. Open mode should not be turned on for general use. Open mode should only be used for a short period of time to clean up pki keys. To turn on open mode set this value to ``True``. .. code-block:: yaml open_mode: False .. conf_master:: auto_accept ``auto_accept`` --------------- Default: ``False`` Enable auto_accept. This setting will automatically accept all incoming public keys from minions. .. code-block:: yaml auto_accept: False .. conf_master:: autosign_timeout ``autosign_timeout`` -------------------- .. versionadded:: 2014.7.0 Default: ``120`` Time in minutes that a incoming public key with a matching name found in pki_dir/minion_autosign/keyid is automatically accepted. Expired autosign keys are removed when the master checks the minion_autosign directory. This method to auto accept minions can be safer than an autosign_file because the keyid record can expire and is limited to being an exact name match. This should still be considered a less than secure option, due to the fact that trust is based on just the requesting minion id. .. conf_master:: autosign_file ``autosign_file`` ----------------- Default: ``not defined`` If the ``autosign_file`` is specified incoming keys specified in the autosign_file will be automatically accepted. Matches will be searched for first by string comparison, then by globbing, then by full-string regex matching. This should still be considered a less than secure option, due to the fact that trust is based on just the requesting minion id. .. conf_master:: autoreject_file ``autoreject_file`` ------------------- .. versionadded:: 2014.1.0 Default: ``not defined`` Works like :conf_master:`autosign_file`, but instead allows you to specify minion IDs for which keys will automatically be rejected. Will override both membership in the :conf_master:`autosign_file` and the :conf_master:`auto_accept` setting. .. conf_master:: client_acl ``client_acl`` -------------- Default: ``{}`` Enable user accounts on the master to execute specific modules. These modules can be expressed as regular expressions. .. code-block:: yaml client_acl: fred: - test.ping - pkg.* .. conf_master:: client_acl_blacklist ``client_acl_blacklist`` ------------------------ Default: ``{}`` Blacklist users or modules This example would blacklist all non sudo users, including root from running any commands. It would also blacklist any use of the "cmd" module. This is completely disabled by default. .. code-block:: yaml client_acl_blacklist: users: - root - '^(?!sudo_).*$' # all non sudo users modules: - cmd .. conf_master:: external_auth ``external_auth`` ----------------- Default: ``{}`` The external auth system uses the Salt auth modules to authenticate and validate users to access areas of the Salt system. .. code-block:: yaml external_auth: pam: fred: - test.* .. conf_master:: token_expire ``token_expire`` ---------------- Default: ``43200`` Time (in seconds) for a newly generated token to live. Default: 12 hours .. code-block:: yaml token_expire: 43200 .. conf_master:: file_recv ``file_recv`` ------------- Default: ``False`` Allow minions to push files to the master. This is disabled by default, for security purposes. .. code-block:: yaml file_recv: False .. conf_master:: master_sign_pubkey ``master_sign_pubkey`` ---------------------- Default: ``False`` Sign the master auth-replies with a cryptographic signature of the masters public key. Please see the tutorial how to use these settings in the `Multimaster-PKI with Failover Tutorial `_ .. code-block:: yaml master_sign_pubkey: True .. conf_master:: master_sign_key_name ``master_sign_key_name`` ------------------------ Default: ``master_sign`` The customizable name of the signing-key-pair without suffix. .. code-block:: yaml master_sign_key_name: .. conf_master:: master_pubkey_signature ``master_pubkey_signature`` --------------------------- Default: ``master_pubkey_signature`` The name of the file in the masters pki-directory that holds the pre-calculated signature of the masters public-key. .. code-block:: yaml master_pubkey_signature: .. conf_master:: master_use_pubkey_signature ``master_use_pubkey_signature`` ------------------------------- Default: ``False`` Instead of computing the signature for each auth-reply, use a pre-calculated signature. The :conf_master:`master_pubkey_signature` must also be set for this. .. code-block:: yaml master_use_pubkey_signature: True .. conf_master:: rotate_aes_key ``rotate_aes_key`` ------------------ Default: ``True`` Rotate the salt-masters AES-key when a minion-public is deleted with salt-key. This is a very important security-setting. Disabling it will enable deleted minions to still listen in on the messages published by the salt-master. Do not disable this unless it is absolutely clear what this does. .. code-block:: yaml rotate_aes_key: True Master Module Management ======================== .. conf_master:: runner_dirs ``runner_dirs`` --------------- Default: ``[]`` Set additional directories to search for runner modules. .. conf_master:: cython_enable ``cython_enable`` ----------------- Default: ``False`` Set to true to enable Cython modules (.pyx files) to be compiled on the fly on the Salt master. .. code-block:: yaml cython_enable: False Master State System Settings ============================ .. conf_master:: state_top ``state_top`` ------------- Default: ``top.sls`` The state system uses a "top" file to tell the minions what environment to use and what modules to use. The state_top file is defined relative to the root of the base environment. .. code-block:: yaml state_top: top.sls .. conf_master:: master_tops ``master_tops`` --------------- Default: ``{}`` The master_tops option replaces the external_nodes option by creating a pluggable system for the generation of external top data. The external_nodes option is deprecated by the master_tops option. To gain the capabilities of the classic external_nodes system, use the following configuration: .. code-block:: yaml master_tops: ext_nodes: .. conf_master:: external_nodes ``external_nodes`` ------------------ Default: None The external_nodes option allows Salt to gather data that would normally be placed in a top file from and external node controller. The external_nodes option is the executable that will return the ENC data. Remember that Salt will look for external nodes AND top files and combine the results if both are enabled and available! .. code-block:: yaml external_nodes: cobbler-ext-nodes .. conf_master:: renderer ``renderer`` ------------ Default: ``yaml_jinja`` The renderer to use on the minions to render the state data. .. code-block:: yaml renderer: yaml_jinja .. conf_master:: failhard ``failhard`` ------------ Default: ``False`` Set the global failhard flag, this informs all states to stop running states at the moment a single state fails. .. code-block:: yaml failhard: False .. conf_master:: state_verbose ``state_verbose`` ----------------- Default: ``True`` Controls the verbosity of state runs. By default, the results of all states are returned, but setting this value to ``False`` will cause salt to only display output for states which either failed, or succeeded without making any changes to the minion. .. code-block:: yaml state_verbose: False .. conf_master:: state_output ``state_output`` ---------------- Default: ``full`` The state_output setting changes if the output is the full multi line output for each changed state if set to 'full', but if set to 'terse' the output will be shortened to a single line. If set to 'mixed', the output will be terse unless a state failed, in which case that output will be full. If set to 'changes', the output will be full unless the state didn't change. .. code-block:: yaml state_output: full .. conf_master:: yaml_utf8 ``yaml_utf8`` ------------- Default: ``False`` Enable extra routines for YAML renderer used states containing UTF characters. .. code-block:: yaml yaml_utf8: False .. conf_master:: test ``test`` -------- Default: ``False`` Set all state calls to only test if they are going to actually make changes or just post what changes are going to be made. .. code-block:: yaml test: False Master File Server Settings =========================== .. conf_master:: fileserver_backend ``fileserver_backend`` ---------------------- Default: ``['roots']`` Salt supports a modular fileserver backend system, this system allows the salt master to link directly to third party systems to gather and manage the files available to minions. Multiple backends can be configured and will be searched for the requested file in the order in which they are defined here. The default setting only enables the standard backend ``roots``, which is configured using the :conf_master:`file_roots` option. Example: .. code-block:: yaml fileserver_backend: - roots - git .. conf_master:: hash_type ``hash_type`` ------------- Default: ``md5`` The hash_type is the hash to use when discovering the hash of a file on the master server. The default is md5, but sha1, sha224, sha256, sha384, and sha512 are also supported. .. code-block:: yaml hash_type: md5 .. conf_master:: file_buffer_size ``file_buffer_size`` -------------------- Default: ``1048576`` The buffer size in the file server in bytes. .. code-block:: yaml file_buffer_size: 1048576 .. conf_master:: file_ignore_regex ``file_ignore_regex`` --------------------- Default: ``''`` A regular expression (or a list of expressions) that will be matched against the file path before syncing the modules and states to the minions. This includes files affected by the file.recurse state. For example, if you manage your custom modules and states in subversion and don't want all the '.svn' folders and content synced to your minions, you could set this to '/\.svn($|/)'. By default nothing is ignored. .. code-block:: yaml file_ignore_regex: - '/\.svn($|/)' - '/\.git($|/)' .. conf_master:: file_ignore_glob ``file_ignore_glob`` -------------------- Default ``''`` A file glob (or list of file globs) that will be matched against the file path before syncing the modules and states to the minions. This is similar to file_ignore_regex above, but works on globs instead of regex. By default nothing is ignored. .. code-block:: yaml file_ignore_glob: - '\*.pyc' - '\*/somefolder/\*.bak' - '\*.swp' roots: Master's Local File Server --------------------------------- .. conf_master:: file_roots ``file_roots`` ************** Default: .. code-block:: yaml base: - /srv/salt Salt runs a lightweight file server written in ZeroMQ to deliver files to minions. This file server is built into the master daemon and does not require a dedicated port. The file server works on environments passed to the master. Each environment can have multiple root directories. The subdirectories in the multiple file roots cannot match, otherwise the downloaded files will not be able to be reliably ensured. A base environment is required to house the top file. Example: .. code-block:: yaml file_roots: base: - /srv/salt dev: - /srv/salt/dev/services - /srv/salt/dev/states prod: - /srv/salt/prod/services - /srv/salt/prod/states git: Git Remote File Server Backend ----------------------------------- .. conf_master:: gitfs_remotes ``gitfs_remotes`` ***************** Default: ``[]`` When using the ``git`` fileserver backend at least one git remote needs to be defined. The user running the salt master will need read access to the repo. The repos will be searched in order to find the file requested by a client and the first repo to have the file will return it. Branches and tags are translated into salt environments. .. code-block:: yaml gitfs_remotes: - git://github.com/saltstack/salt-states.git - file:///var/git/saltmaster .. note:: ``file://`` repos will be treated as a remote and copied into the master's gitfs cache, so only the *local* refs for those repos will be exposed as fileserver environments. As of 2014.7.0, it is possible to have per-repo versions of several of the gitfs configuration parameters. For more information, see the :ref:`GitFS Walkthrough `. .. conf_master:: gitfs_provider ``gitfs_provider`` ****************** .. versionadded:: 2014.7.0 Specify the provider to be used for gitfs. More information can be found in the :ref:`GitFS Walkthrough `. Specify one value among valid values: ``gitpython``, ``pygit2``, ``dulwich`` .. _pygit2: https://github.com/libgit2/pygit2 .. _GitPython: https://github.com/gitpython-developers/GitPython .. _dulwich: https://www.samba.org/~jelmer/dulwich/ .. code-block:: yaml gitfs_provider: dulwich .. conf_master:: gitfs_ssl_verify ``gitfs_ssl_verify`` ******************** Default: ``True`` The ``gitfs_ssl_verify`` option specifies whether to ignore SSL certificate errors when contacting the gitfs backend. You might want to set this to false if you're using a git backend that uses a self-signed certificate but keep in mind that setting this flag to anything other than the default of ``True`` is a security concern, you may want to try using the ssh transport. .. code-block:: yaml gitfs_ssl_verify: True .. conf_master:: gitfs_mountpoint ``gitfs_mountpoint`` ******************** .. versionadded:: 2014.7.0 Default: ``''`` Specifies a path on the salt fileserver from which gitfs remotes are served. Can be used in conjunction with :conf_master:`gitfs_root`. Can also be configured on a per-remote basis, see :ref:`here ` for more info. .. code-block:: yaml gitfs_mountpoint: salt://foo/bar .. note:: The ``salt://`` protocol designation can be left off (in other words, ``foo/bar`` and ``salt://foo/bar`` are equivalent). .. conf_master:: gitfs_root ``gitfs_root`` ************** Default: ``''`` Serve files from a subdirectory within the repository, instead of the root. This is useful when there are files in the repository that should not be available to the Salt fileserver. Can be used in conjunction with :conf_master:`gitfs_mountpoint`. .. code-block:: yaml gitfs_root: somefolder/otherfolder .. versionchanged:: 2014.7.0 Ability to specify gitfs roots on a per-remote basis was added. See :ref:`here ` for more info. .. conf_master:: gitfs_base ``gitfs_base`` ************** Default: ``master`` Defines which branch/tag should be used as the ``base`` environment. .. code-block:: yaml gitfs_base: salt .. versionchanged:: 2014.7.0 Ability to specify the base on a per-remote basis was added. See :ref:`here ` for more info. .. conf_master:: gitfs_env_whitelist ``gitfs_env_whitelist`` *********************** .. versionadded:: 2014.7.0 Default: ``[]`` Used to restrict which environments are made available. Can speed up state runs if the repos in :conf_master:`gitfs_remotes` contain many branches/tags. More information can be found in the :ref:`GitFS Walkthrough `. .. code-block:: yaml gitfs_env_whitelist: - base - v1.* - 'mybranch\d+' .. conf_master:: gitfs_env_blacklist ``gitfs_env_blacklist`` *********************** .. versionadded:: 2014.7.0 Default: ``[]`` Used to restrict which environments are made available. Can speed up state runs if the repos in :conf_master:`gitfs_remotes` contain many branches/tags. More information can be found in the :ref:`GitFS Walkthrough `. .. code-block:: yaml gitfs_env_blacklist: - base - v1.* - 'mybranch\d+' GitFS Authentication Options **************************** These parameters only currently apply to the pygit2 gitfs provider. Examples of how to use these can be found in the :ref:`GitFS Walkthrough `. .. conf_master:: gitfs_user ``gitfs_user`` ~~~~~~~~~~~~~~ .. versionadded:: 2014.7.0 Default: ``''`` Along with :conf_master:`gitfs_password`, is used to authenticate to HTTPS remotes. .. code-block:: yaml gitfs_user: git .. conf_master:: gitfs_password ``gitfs_password`` ~~~~~~~~~~~~~~~~~~ .. versionadded:: 2014.7.0 Default: ``''`` Along with :conf_master:`gitfs_user`, is used to authenticate to HTTPS remotes. This parameter is not required if the repository does not use authentication. .. code-block:: yaml gitfs_password: mypassword .. conf_master:: gitfs_insecure_auth ``gitfs_insecure_auth`` ~~~~~~~~~~~~~~~~~~~~~~~ .. versionadded:: 2014.7.0 Default: ``False`` By default, Salt will not authenticate to an HTTP (non-HTTPS) remote. This parameter enables authentication over HTTP. **Enable this at your own risk.** .. code-block:: yaml gitfs_insecure_auth: True .. conf_master:: gitfs_pubkey ``gitfs_pubkey`` ~~~~~~~~~~~~~~~~ .. versionadded:: 2014.7.0 Default: ``''`` Along with :conf_master:`gitfs_privkey` (and optionally :conf_master:`gitfs_passphrase`), is used to authenticate to SSH remotes. This parameter (or its :ref:`per-remote counterpart `) is required for SSH remotes. .. code-block:: yaml gitfs_pubkey: /path/to/key.pub .. conf_master:: gitfs_privkey ``gitfs_privkey`` ~~~~~~~~~~~~~~~~~ .. versionadded:: 2014.7.0 Default: ``''`` Along with :conf_master:`gitfs_pubkey` (and optionally :conf_master:`gitfs_passphrase`), is used to authenticate to SSH remotes. This parameter (or its :ref:`per-remote counterpart `) is required for SSH remotes. .. code-block:: yaml gitfs_privkey: /path/to/key .. conf_master:: gitfs_passphrase ``gitfs_passphrase`` ~~~~~~~~~~~~~~~~~~~~ .. versionadded:: 2014.7.0 Default: ``''`` This parameter is optional, required only when the SSH key being used to authenticate is protected by a passphrase. .. code-block:: yaml gitfs_passphrase: mypassphrase hg: Mercurial Remote File Server Backend ---------------------------------------- .. conf_master:: hgfs_remotes ``hgfs_remotes`` **************** .. versionadded:: 0.17.0 Default: ``[]`` When using the ``hg`` fileserver backend at least one mercurial remote needs to be defined. The user running the salt master will need read access to the repo. The repos will be searched in order to find the file requested by a client and the first repo to have the file will return it. Branches and/or bookmarks are translated into salt environments, as defined by the :conf_master:`hgfs_branch_method` parameter. .. code-block:: yaml hgfs_remotes: - https://username@bitbucket.org/username/reponame .. note:: As of 2014.7.0, it is possible to have per-repo versions of the :conf_master:`hgfs_root`, :conf_master:`hgfs_mountpoint`, :conf_master:`hgfs_base`, and :conf_master:`hgfs_branch_method` parameters. For example: .. code-block:: yaml hgfs_remotes: - https://username@bitbucket.org/username/repo1 - base: saltstates - https://username@bitbucket.org/username/repo2: - root: salt - mountpoint: salt://foo/bar/baz - https://username@bitbucket.org/username/repo3: - root: salt/states - branch_method: mixed .. conf_master:: hgfs_branch_method ``hgfs_branch_method`` ********************** .. versionadded:: 0.17.0 Default: ``branches`` Defines the objects that will be used as fileserver environments. * ``branches`` - Only branches and tags will be used * ``bookmarks`` - Only bookmarks and tags will be used * ``mixed`` - Branches, bookmarks, and tags will be used .. code-block:: yaml hgfs_branch_method: mixed .. note:: Starting in version 2014.1.0, the value of the :conf_master:`hgfs_base` parameter defines which branch is used as the ``base`` environment, allowing for a ``base`` environment to be used with an :conf_master:`hgfs_branch_method` of ``bookmarks``. Prior to this release, the ``default`` branch will be used as the ``base`` environment. .. conf_master:: hgfs_mountpoint ``hgfs_mountpoint`` ******************* .. versionadded:: 2014.7.0 Default: ``''`` Specifies a path on the salt fileserver from which hgfs remotes are served. Can be used in conjunction with :conf_master:`hgfs_root`. Can also be configured on a per-remote basis, see :conf_master:`here ` for more info. .. code-block:: yaml hgfs_mountpoint: salt://foo/bar .. note:: The ``salt://`` protocol designation can be left off (in other words, ``foo/bar`` and ``salt://foo/bar`` are equivalent). .. conf_master:: hgfs_root ``hgfs_root`` ************* .. versionadded:: 0.17.0 Default: ``''`` Serve files from a subdirectory within the repository, instead of the root. This is useful when there are files in the repository that should not be available to the Salt fileserver. Can be used in conjunction with :conf_master:`hgfs_mountpoint`. .. code-block:: yaml hgfs_root: somefolder/otherfolder .. versionchanged:: 2014.7.0 Ability to specify hgfs roots on a per-remote basis was added. See :conf_master:`here ` for more info. .. conf_master:: hgfs_base ``hgfs_base`` ************* .. versionadded:: 2014.1.0 Default: ``default`` Defines which branch should be used as the ``base`` environment. Change this if :conf_master:`hgfs_branch_method` is set to ``bookmarks`` to specify which bookmark should be used as the ``base`` environment. .. code-block:: yaml hgfs_base: salt .. conf_master:: hgfs_env_whitelist ``hgfs_env_whitelist`` ********************** .. versionadded:: 2014.7.0 Default: ``[]`` Used to restrict which environments are made available. Can speed up state runs if your hgfs remotes contain many branches/bookmarks/tags. Full names, globs, and regular expressions are supported. If using a regular expression, the expression must match the entire minion ID. If used, only branches/bookmarks/tags which match one of the specified expressions will be exposed as fileserver environments. If used in conjunction with :conf_master:`hgfs_env_blacklist`, then the subset of branches/bookmarks/tags which match the whitelist but do *not* match the blacklist will be exposed as fileserver environments. .. code-block:: yaml hgfs_env_whitelist: - base - v1.* - 'mybranch\d+' .. conf_master:: hgfs_env_blacklist ``hgfs_env_blacklist`` ********************** .. versionadded:: 2014.7.0 Default: ``[]`` Used to restrict which environments are made available. Can speed up state runs if your hgfs remotes contain many branches/bookmarks/tags. Full names, globs, and regular expressions are supported. If using a regular expression, the expression must match the entire minion ID. If used, branches/bookmarks/tags which match one of the specified expressions will *not* be exposed as fileserver environments. If used in conjunction with :conf_master:`hgfs_env_whitelist`, then the subset of branches/bookmarks/tags which match the whitelist but do *not* match the blacklist will be exposed as fileserver environments. .. code-block:: yaml hgfs_env_blacklist: - base - v1.* - 'mybranch\d+' svn: Subversion Remote File Server Backend ------------------------------------------ .. conf_master:: svnfs_remotes ``svnfs_remotes`` ***************** .. versionadded:: 0.17.0 Default: ``[]`` When using the ``svn`` fileserver backend at least one subversion remote needs to be defined. The user running the salt master will need read access to the repo. The repos will be searched in order to find the file requested by a client and the first repo to have the file will return it. The trunk, branches, and tags become environments, with the trunk being the ``base`` environment. .. code-block:: yaml svnfs_remotes: - svn://foo.com/svn/myproject .. note:: As of 2014.7.0, it is possible to have per-repo versions of the following configuration parameters: * :conf_master:`svnfs_root` * :conf_master:`svnfs_mountpoint` * :conf_master:`svnfs_trunk` * :conf_master:`svnfs_branches` * :conf_master:`svnfs_tags` For example: .. code-block:: yaml svnfs_remotes: - svn://foo.com/svn/project1 - svn://foo.com/svn/project2: - root: salt - mountpoint: salt://foo/bar/baz - svn//foo.com/svn/project3: - root: salt/states - branches: branch - tags: tag .. conf_master:: svnfs_mountpoint ``svnfs_mountpoint`` ******************** .. versionadded:: 2014.7.0 Default: ``''`` Specifies a path on the salt fileserver from which svnfs remotes are served. Can be used in conjunction with :conf_master:`svnfs_root`. Can also be configured on a per-remote basis, see :conf_master:`here ` for more info. .. code-block:: yaml svnfs_mountpoint: salt://foo/bar .. note:: The ``salt://`` protocol designation can be left off (in other words, ``foo/bar`` and ``salt://foo/bar`` are equivalent). .. conf_master:: svnfs_root ``svnfs_root`` ************** .. versionadded:: 0.17.0 Default: ``''`` Serve files from a subdirectory within the repository, instead of the root. This is useful when there are files in the repository that should not be available to the Salt fileserver. Can be used in conjunction with :conf_master:`svnfs_mountpoint`. .. code-block:: yaml svnfs_root: somefolder/otherfolder .. versionchanged:: 2014.7.0 Ability to specify svnfs roots on a per-remote basis was added. See :conf_master:`here ` for more info. .. conf_master:: svnfs_trunk ``svnfs_trunk`` *************** .. versionadded:: 2014.7.0 Default: ``trunk`` Path relative to the root of the repository where the trunk is located. Can also be configured on a per-remote basis, see :conf_master:`here ` for more info. .. code-block:: yaml svnfs_trunk: trunk .. conf_master:: svnfs_branches ``svnfs_branches`` ****************** .. versionadded:: 2014.7.0 Default: ``branches`` Path relative to the root of the repository where the branches are located. Can also be configured on a per-remote basis, see :conf_master:`here ` for more info. .. code-block:: yaml svnfs_branches: branches .. conf_master:: svnfs_tags ``svnfs_tags`` ************** .. versionadded:: 2014.7.0 Default: ``tags`` Path relative to the root of the repository where the tags are located. Can also be configured on a per-remote basis, see :conf_master:`here ` for more info. .. code-block:: yaml svnfs_tags: tags .. conf_master:: svnfs_env_whitelist ``svnfs_env_whitelist`` *********************** .. versionadded:: 2014.7.0 Default: ``[]`` Used to restrict which environments are made available. Can speed up state runs if your svnfs remotes contain many branches/tags. Full names, globs, and regular expressions are supported. If using a regular expression, the expression must match the entire minion ID. If used, only branches/tags which match one of the specified expressions will be exposed as fileserver environments. If used in conjunction with :conf_master:`svnfs_env_blacklist`, then the subset of branches/tags which match the whitelist but do *not* match the blacklist will be exposed as fileserver environments. .. code-block:: yaml svnfs_env_whitelist: - base - v1.* - 'mybranch\d+' .. conf_master:: svnfs_env_blacklist ``svnfs_env_blacklist`` *********************** .. versionadded:: 2014.7.0 Default: ``[]`` Used to restrict which environments are made available. Can speed up state runs if your svnfs remotes contain many branches/tags. Full names, globs, and regular expressions are supported. If using a regular expression, the expression must match the entire minion ID. If used, branches/tags which match one of the specified expressions will *not* be exposed as fileserver environments. If used in conjunction with :conf_master:`svnfs_env_whitelist`, then the subset of branches/tags which match the whitelist but do *not* match the blacklist will be exposed as fileserver environments. .. code-block:: yaml svnfs_env_blacklist: - base - v1.* - 'mybranch\d+' minion: MinionFS Remote File Server Backend ------------------------------------------- .. conf_master:: minionfs_env ``minionfs_env`` **************** .. versionadded:: 2014.7.0 Default: ``base`` Environment from which MinionFS files are made available. .. code-block:: yaml minionfs_env: minionfs .. conf_master:: minionfs_mountpoint ``minionfs_mountpoint`` *********************** .. versionadded:: 2014.7.0 Default: ``''`` Specifies a path on the salt fileserver from which minionfs files are served. .. code-block:: yaml minionfs_mountpoint: salt://foo/bar .. note:: The ``salt://`` protocol designation can be left off (in other words, ``foo/bar`` and ``salt://foo/bar`` are equivalent). .. conf_master:: minionfs_whitelist ``minionfs_whitelist`` ********************** .. versionadded:: 2014.7.0 Default: ``[]`` Used to restrict which minions' pushed files are exposed via minionfs. If using a regular expression, the expression must match the entire minion ID. If used, only the pushed files from minions which match one of the specified expressions will be exposed. If used in conjunction with :conf_master:`minionfs_blacklist`, then the subset of hosts which match the whitelist but do *not* match the blacklist will be exposed. .. code-block:: yaml minionfs_whitelist: - base - v1.* - 'mybranch\d+' .. conf_master:: minionfs_blacklist ``minionfs_blacklist`` ********************** .. versionadded:: 2014.7.0 Default: ``[]`` Used to restrict which minions' pushed files are exposed via minionfs. If using a regular expression, the expression must match the entire minion ID. If used, only the pushed files from minions which match one of the specified expressions will *not* be exposed. If used in conjunction with :conf_master:`minionfs_whitelist`, then the subset of hosts which match the whitelist but do *not* match the blacklist will be exposed. .. code-block:: yaml minionfs_blacklist: - base - v1.* - 'mybranch\d+' .. _pillar-configuration: Pillar Configuration ==================== .. conf_master:: pillar_roots ``pillar_roots`` ---------------- Default: .. code-block:: yaml base: - /srv/pillar Set the environments and directories used to hold pillar sls data. This configuration is the same as :conf_master:`file_roots`: .. code-block:: yaml pillar_roots: base: - /srv/pillar dev: - /srv/pillar/dev prod: - /srv/pillar/prod .. conf_master:: ext_pillar ``ext_pillar`` -------------- The ext_pillar option allows for any number of external pillar interfaces to be called when populating pillar data. The configuration is based on ext_pillar functions. The available ext_pillar functions can be found herein: :blob:`salt/pillar` By default, the ext_pillar interface is not configured to run. Default: ``None`` .. code-block:: yaml ext_pillar: - hiera: /etc/hiera.yaml - cmd_yaml: cat /etc/salt/yaml - reclass: inventory_base_uri: /etc/reclass There are additional details at :ref:`salt-pillars` .. conf_master:: ext_pillar_first ``ext_pillar_first`` -------------------- .. versionadded:: 2015.2.0 The ext_pillar_first option allows for external pillar sources to populate before file system pillar. This allows for targeting file system pillar from ext_pillar. Default: ``False`` .. code-block:: yaml ext_pillar_first: False .. conf_master:: pillar_source_merging_strategy ``pillar_source_merging_strategy`` ---------------------------------- .. versionadded:: 2014.7.0 Default: ``smart`` The pillar_source_merging_strategy option allows you to configure merging strategy between different sources. It accepts 4 values: * recurse: it will merge recursively mapping of data. For example, theses 2 sources: .. code-block:: yaml foo: 42 bar: element1: True .. code-block:: yaml bar: element2: True baz: quux will be merged as: .. code-block:: yaml foo: 42 bar: element1: True element2: True baz: quux * aggregate: instructs aggregation of elements between sources that use the #!yamlex renderer. For example, these two documents: .. code-block:: yaml #!yamlex foo: 42 bar: !aggregate { element1: True } baz: !aggregate quux .. code-block:: yaml #!yamlex bar: !aggregate { element2: True } baz: !aggregate quux2 will be merged as: .. code-block:: yaml foo: 42 bar: element1: True element2: True baz: - quux - quux2 * overwrite: Will use the behaviour of the 2014.1 branch and earlier. Overwrites elements according the order in which they are processed. First pillar processed: .. code-block:: yaml A: first_key: blah second_key: blah Second pillar processed: .. code-block:: yaml A: third_key: blah fourth_key: blah will be merged as: .. code-block:: yaml A: third_key: blah fourth_key: blah * smart (default): Guesses the best strategy based on the "renderer" setting. Syndic Server Settings ====================== A Salt syndic is a Salt master used to pass commands from a higher Salt master to minions below the syndic. Using the syndic is simple. If this is a master that will have syndic servers(s) below it, set the "order_masters" setting to True. If this is a master that will be running a syndic daemon for passthrough the "syndic_master" setting needs to be set to the location of the master server. Do not not forget that, in other words, it means that it shares with the local minion its ID and PKI_DIR. .. conf_master:: order_masters ``order_masters`` ----------------- Default: ``False`` Extra data needs to be sent with publications if the master is controlling a lower level master via a syndic minion. If this is the case the order_masters value must be set to True .. code-block:: yaml order_masters: False .. conf_master:: syndic_master ``syndic_master`` ----------------- Default: ``None`` If this master will be running a salt-syndic to connect to a higher level master, specify the higher level master with this configuration value. .. code-block:: yaml syndic_master: masterofmasters .. conf_master:: syndic_master_port ``syndic_master_port`` ----------------------- Default: ``4506`` If this master will be running a salt-syndic to connect to a higher level master, specify the higher level master port with this configuration value. .. code-block:: yaml syndic_master_port: 4506 .. conf_master:: syndic_log_file .. conf_master:: syndic_master_log_file ``syndic_pidfile`` ------------------ Default: ``salt-syndic.pid`` If this master will be running a salt-syndic to connect to a higher level master, specify the pidfile of the syndic daemon. .. code-block:: yaml syndic_pidfile: syndic.pid ``syndic_log_file`` ------------------- Default: ``syndic.log`` If this master will be running a salt-syndic to connect to a higher level master, specify the log_file of the syndic daemon. .. code-block:: yaml syndic_log_file: salt-syndic.log Peer Publish Settings ===================== Salt minions can send commands to other minions, but only if the minion is allowed to. By default "Peer Publication" is disabled, and when enabled it is enabled for specific minions and specific commands. This allows secure compartmentalization of commands based on individual minions. .. conf_master:: peer ``peer`` -------- Default: ``{}`` The configuration uses regular expressions to match minions and then a list of regular expressions to match functions. The following will allow the minion authenticated as foo.example.com to execute functions from the test and pkg modules. .. code-block:: yaml peer: foo.example.com: - test.* - pkg.* This will allow all minions to execute all commands: .. code-block:: yaml peer: .*: - .* This is not recommended, since it would allow anyone who gets root on any single minion to instantly have root on all of the minions! By adding an additional layer you can limit the target hosts in addition to the accessible commands: .. code-block:: yaml peer: foo.example.com: 'db*': - test.* - pkg.* .. conf_master:: peer_run ``peer_run`` ------------ Default: ``{}`` The peer_run option is used to open up runners on the master to access from the minions. The peer_run configuration matches the format of the peer configuration. The following example would allow foo.example.com to execute the manage.up runner: .. code-block:: yaml peer_run: foo.example.com: - manage.up .. _master-logging-settings: Master Logging Settings ======================= .. conf_master:: log_file ``log_file`` ------------ Default: ``/var/log/salt/master`` The master log can be sent to a regular file, local path name, or network location. See also :conf_log:`log_file`. Examples: .. code-block:: yaml log_file: /var/log/salt/master .. code-block:: yaml log_file: file:///dev/log .. code-block:: yaml log_file: udp://loghost:10514 .. conf_master:: log_level ``log_level`` ------------- Default: ``warning`` The level of messages to send to the console. See also :conf_log:`log_level`. .. code-block:: yaml log_level: warning .. conf_master:: log_level_logfile ``log_level_logfile`` --------------------- Default: ``warning`` The level of messages to send to the log file. See also :conf_log:`log_level_logfile`. .. code-block:: yaml log_level_logfile: warning .. conf_master:: log_datefmt ``log_datefmt`` --------------- Default: ``%H:%M:%S`` The date and time format used in console log messages. See also :conf_log:`log_datefmt`. .. code-block:: yaml log_datefmt: '%H:%M:%S' .. conf_master:: log_datefmt_logfile ``log_datefmt_logfile`` ----------------------- Default: ``%Y-%m-%d %H:%M:%S`` The date and time format used in log file messages. See also :conf_log:`log_datefmt_logfile`. .. code-block:: yaml log_datefmt_logfile: '%Y-%m-%d %H:%M:%S' .. conf_master:: log_fmt_console ``log_fmt_console`` ------------------- Default: ``[%(levelname)-8s] %(message)s`` The format of the console logging messages. See also :conf_log:`log_fmt_console`. .. code-block:: yaml log_fmt_console: '[%(levelname)-8s] %(message)s' .. conf_master:: log_fmt_logfile ``log_fmt_logfile`` ------------------- Default: ``%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s`` The format of the log file logging messages. See also :conf_log:`log_fmt_logfile`. .. code-block:: yaml log_fmt_logfile: '%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s' .. conf_master:: log_granular_levels ``log_granular_levels`` ----------------------- Default: ``{}`` This can be used to control logging levels more specifically. See also :conf_log:`log_granular_levels`. Node Groups =========== .. conf_master:: nodegroups Default: ``{}`` Node groups allow for logical groupings of minion nodes. A group consists of a group name and a compound target. .. code-block:: yaml nodegroups: group1: 'L@foo.domain.com,bar.domain.com,baz.domain.com or bl*.domain.com' group2: 'G@os:Debian and foo.domain.com' group3: 'G@os:Debian and N@group1' More information on using nodegroups can be found :ref:`here `. Range Cluster Settings ====================== .. conf_master:: range_server ``range_server`` ---------------- Default: ``''`` The range server (and optional port) that serves your cluster information https://github.com/ytoolshed/range/wiki/%22yamlfile%22-module-file-spec .. code-block:: yaml range_server: range:80 Include Configuration ===================== .. conf_master:: default_include ``default_include`` ------------------- Default: ``master.d/*.conf`` The master can include configuration from other files. Per default the master will automatically include all config files from ``master.d/*.conf`` where ``master.d`` is relative to the directory of the master configuration file. .. conf_master:: include ``include`` ----------- Default: ``not defined`` The master can include configuration from other files. To enable this, pass a list of paths to this option. The paths can be either relative or absolute; if relative, they are considered to be relative to the directory the main minion configuration file lives in. Paths can make use of shell-style globbing. If no files are matched by a path passed to this option then the master will log a warning message. .. code-block:: yaml # Include files from a master.d directory in the same # directory as the master config file include: master.d/* # Include a single extra file into the configuration include: /etc/roles/webserver # Include several files and the master.d directory include: - extra_config - master.d/* - /etc/roles/webserver Windows Software Repo Settings ============================== .. conf_master:: win_repo ``win_repo`` ------------ Default: ``/srv/salt/win/repo`` Location of the repo on the master .. code-block:: yaml win_repo: '/srv/salt/win/repo' .. conf_master:: win_repo_mastercachefile ``win_repo_mastercachefile`` ---------------------------- Default: ``/srv/salt/win/repo/winrepo.p`` .. code-block:: yaml win_repo_mastercachefile: '/srv/salt/win/repo/winrepo.p' .. conf_master:: win_gitrepos ``win_gitrepos`` ---------------- Default: ``''`` List of git repositories to include with the local repo. .. code-block:: yaml win_gitrepos: - 'https://github.com/saltstack/salt-winrepo.git'