.. _salt-ssh: ======== Salt SSH ======== .. raw:: html :file: index.html Getting Started =============== Salt SSH is very easy to use, simply set up a basic `roster` file of the systems to connect to and run ``salt-ssh`` commands in a similar way as standard ``salt`` commands. - Salt ssh is considered production ready in version 2014.7.0 - Python is required on the remote system (unless using the ``-r`` option to send raw ssh commands) - On many systems, the ``salt-ssh`` executable will be in its own package, usually named ``salt-ssh`` - The Salt SSH system does not supercede the standard Salt communication systems, it simply offers an SSH-based alternative that does not require ZeroMQ and a remote agent. Be aware that since all communication with Salt SSH is executed via SSH it is substantially slower than standard Salt with ZeroMQ. - At the moment fileserver operations must be wrapped to ensure that the relevant files are delivered with the ``salt-ssh`` commands. The state module is an exception, which compiles the state run on the master, and in the process finds all the references to ``salt://`` paths and copies those files down in the same tarball as the state run. However, needed fileserver wrappers are still under development. Salt SSH Roster =============== The roster system in Salt allows for remote minions to be easily defined. .. note:: See the :doc:`Roster documentation ` for more details. Simply create the roster file, the default location is `/etc/salt/roster`: .. code-block:: yaml web1: 192.168.42.1 This is a very basic roster file where a Salt ID is being assigned to an IP address. A more elaborate roster can be created: .. code-block:: yaml web1: host: 192.168.42.1 # The IP addr or DNS hostname user: fred # Remote executions will be executed as user fred passwd: foobarbaz # The password to use for login, if omitted, keys are used sudo: True # Whether to sudo to root, not enabled by default web2: host: 192.168.42.2 .. note:: sudo works only if NOPASSWD is set for user in /etc/sudoers: ``fred ALL=(ALL) NOPASSWD: ALL`` Deploy ssh key for salt-ssh =========================== By default, salt-ssh will generate key pairs for ssh, the default path will be /etc/salt/pki/master/ssh/salt-ssh.rsa You can use ssh-copy-id, (the OpenSSH key deployment tool) to deploy keys to your servers. .. code-block:: bash ssh-copy-id -i /etc/salt/pki/master/ssh/salt-ssh.rsa.pub user@server.demo.com One could also create a simple shell script, named salt-ssh-copy-id.sh as follows: .. code-block:: bash #!/bin/bash if [ -z $1 ]; then echo $0 user@host.com exit 0 fi ssh-copy-id -i /etc/salt/pki/master/ssh/salt-ssh.rsa.pub $1 .. note:: Be certain to chmod +x salt-ssh-copy-id.sh. .. code-block:: bash ./salt-ssh-copy-id.sh user@server1.host.com ./salt-ssh-copy-id.sh user@server2.host.com Once keys are successfully deployed, salt-ssh can be used to control them. Calling Salt SSH ================ The ``salt-ssh`` command can be easily executed in the same way as a salt command: .. code-block:: bash salt-ssh '*' test.ping Commands with ``salt-ssh`` follow the same syntax as the ``salt`` command. The standard salt functions are available! The output is the same as ``salt`` and many of the same flags are available. Please see http://docs.saltstack.com/ref/cli/salt-ssh.html for all of the available options. Raw Shell Calls --------------- By default ``salt-ssh`` runs Salt execution modules on the remote system, but ``salt-ssh`` can also execute raw shell commands: .. code-block:: bash salt-ssh '*' -r 'ifconfig' States Via Salt SSH =================== The Salt State system can also be used with ``salt-ssh``. The state system abstracts the same interface to the user in ``salt-ssh`` as it does when using standard ``salt``. The intent is that Salt Formulas defined for standard ``salt`` will work seamlessly with ``salt-ssh`` and vice-versa. The standard Salt States walkthroughs function by simply replacing ``salt`` commands with ``salt-ssh``. Targeting with Salt SSH ======================= Due to the fact that the targeting approach differs in salt-ssh, only glob and regex targets are supported as of this writing, the remaining target systems still need to be implemented. .. note:: By default, Grains are settable through ``salt-ssh``. By default, these grains will *not* be persisted across reboots. See the "thin_dir" setting in :doc:`Roster documentation ` for more details. Configuring Salt SSH ==================== Salt SSH takes its configuration from a master configuration file. Normally, this file is in ``/etc/salt/master``. If one wishes to use a customized configuration file, the ``-c`` option to Salt SSH facilitates passing in a directory to look inside for a configuration file named ``master``. Minion Config --------------- .. versionadded:: 2015.5.1 Minion config options can be defined globally using the master configuration option ``ssh_minion_opts``. It can also be defined on a per-minion basis with the ``minion_opts`` entry in the roster. Running Salt SSH as non-root user ================================= By default, Salt read all the configuration from /etc/salt/. If you are running Salt SSH with a regular user you have to modify some paths or you will get "Permission denied" messages. You have to modify two parameters: ``pki_dir`` and ``cachedir``. Those should point to a full path writable for the user. It's recommed not to modify /etc/salt for this purpose. Create a private copy of /etc/salt for the user and run the command with ``-c /new/config/path``. Define CLI Options with Saltfile ================================ If you are commonly passing in CLI options to ``salt-ssh``, you can create a ``Saltfile`` to automatically use these options. This is common if you're managing several different salt projects on the same server. So you can ``cd`` into a directory that has a ``Saltfile`` with the following YAML contents: .. code-block:: yaml salt-ssh: config_dir: path/to/config/dir max_procs: 30 wipe_ssh: True Instead of having to call ``salt-ssh --config-dir=path/to/config/dir --max-procs=30 --wipe \* test.ping`` you can call ``salt-ssh \* test.ping``. Boolean-style options should be specified in their YAML representation. .. note:: The option keys specified must match the destination attributes for the options specified in the parser :py:class:`salt.utils.parsers.SaltSSHOptionParser`. For example, in the case of the ``--wipe`` command line option, its ``dest`` is configured to be ``wipe_ssh`` and thus this is what should be configured in the ``Saltfile``. Using the names of flags for this option, being ``wipe: True`` or ``w: True``, will not work.