This makes the following changes:
- The `append_newline` argument to the `file.blockreplace`
remote-execution function has been modified so that if its value is
`None`, it only appends a newline when the content block does not end
in one.
- A couple of fixes were made to newline handling. The existing code
normalized the newlines in the content block, replacing them with
os.linesep. However, when the file contains newlines that don't match
the OS (i.e. POSIX newlines in a file on a Windows box, or Windows
newlines on a Linux/Mac/BSD/etc. box), then we would still end up with
mixed newlines. The line separator is now detected when we read in the
original file, and the detected line separator is used when writing
the content block. Additionally, the same newline mismatch was
possible when appending/prepending the content block. This has been
fixed by using a common function for appending, prepending, and
replacing the content block.
- Support for the `append_newline` argument has been added to the
`file.blockreplace` state. The default value for the state is `None`.
A `versionchanged` has been added to the remote execution function to
let users know that the Fluorine release will change the default value
of that variable.
- 20 new integration tests have been written to test the
`file.blockreplace` state.
This makes the following changes:
- The `append_newline` argument to the `file.blockreplace`
remote-execution function has been modified so that if its value is
`None`, it only appends a newline when the content block does not end
in one.
- A couple of fixes were made to newline handling. The existing code
normalized the newlines in the content block, replacing them with
os.linesep. However, when the file contains newlines that don't match
the OS (i.e. POSIX newlines in a file on a Windows box, or Windows
newlines on a Linux/Mac/BSD/etc. box), then we would still end up with
mixed newlines. The line separator is now detected when we read in the
original file, and the detected line separator is used when writing
the content block. Additionally, the same newline mismatch was
possible when appending/prepending the content block. This has been
fixed by using a common function for appending, prepending, and
replacing the content block.
- Support for the `append_newline` argument has been added to the
`file.blockreplace` state. The default value for the state is `None`.
A `versionchanged` has been added to the remote execution function to
let users know that the Fluorine release will change the default value
of that variable.
- 20 new integration tests have been written to test the
`file.blockreplace` state.
This preserves the custom mock_open we backported from unittest.mock,
but otherwise ditches unittest.mock as it does not have
MagicMock.assert_called in Python releases before 3.6.
This allows us to maintain a uniform mock version across all platforms
and Python releases.
Some of these have been failing in ways which are not reproducible
locally. This adds debug logging so that we can check the
salt-runtests.log for the return data, to aid in troubleshooting.
NOTE: This also contains a fix for a bug in the CLI output handler that
I think may have a chance of fixing some of these odd failures.
https://github.com/saltstack/salt/pull/45687 and
https://github.com/saltstack/salt/pull/45725 fixed problems with older
Python 2 versions interacting with the struct module, since
unicode_literals turned the format strings to unicode and older Python 2
releases can't accept a unicode format string. Since Python 2 and 3 both
support using bytestrings for the format strings, this commit makes sure
we are using bytestrings everywhere else we are using struct.pack/unpack.
Without allow_unicode=True, unicode characters are processed through the
str representer and on Python 2 are dumped as a Unicode code point (i.e.
a literal \u0414). This commit makes allow_unicode=True the default in
our salt.utils.yamlloader.safe_dump() helper. It also adds a new
salt.utils.yamlloader.dump() helper which wraps yaml.dump() and also
makes allow_unicode=True the default.
To make importing and using our custom yaml loader/dumper easier, a
convenience module called salt.utils.yaml has been added, which does a
wildcard import from both salt.utils.yamldumper and
salt.utils.yamlloader.
Refs to yaml.load/dump and yaml.safe_load/safe_dump have been updated to
salt.utils.yaml, to ensure that unicode is handled properly.
When CherryPy run with python3 it reads "bytes" from the wire.
In case of python2 BytesIO == StringIO, so nothing should change.
This change will do the same to make unit tests reflect reality.
Python 3 does not appear to pass all values to the `__import__` builtin
when they do not differ from the defaults. Therefore, the fake import
fails because of missing positional args.
This fix simply uses the defaults from Python 2 and 3's `__import__`
builtin.
This makes the 2.x usage invalid syntax and forces the use of print as a
function. This adds the import to the files which I've updated in the
last couple of days but forgot to add it.
Much Improved Support for Docker Networking
===========================================
The `docker_network.present` state has undergone a full rewrite, which
includes the following improvements:
Full API Support for Network Management
---------------------------------------
The improvements made to input handling in the
`docker_container.running` state for 2017.7.0 have now been expanded to
docker_network.present`. This brings with it full support for all
tunable configuration arguments.
Custom Subnets
--------------
Custom subnets can now be configured. Both IPv4 and mixed IPv4/IPv6
networks are supported.
Network Configuration in :py:func:`docker_container.running` States
-------------------------------------------------------------------
It is now possible to configure static IPv4/IPv6 addresses, as well as
links and labels.
Improved Handling of Images from Custom Registries
==================================================
Rather than attempting to parse the tag from the passed image name, Salt
will now resolve that tag down to an image ID and use that ID instead.
Due to this change, there are some backward-incompatible changes to
image management. See below for a full list of these changes.
Backward-incompatible Changes to Docker Image Management
--------------------------------------------------------
Passing image names to the following functions must now be done using separate
`repository` and `tag` arguments:
- `docker.build`
- `docker.commit`
- `docker.import`
- `docker.load`
- `docker.tag`
- `docker.sls_build`
Additionally, the `tag` argument must now be explicitly passed to the
`docker_image.present` state, unless the image is being pulled from a
docker registry.
Remove while loop that was hanging when `salt` wasn't in the path
Add salt.util.path.safe_path function to check for unsafe paths
Pass root_dir to all calls to `verify_env`
These didn't get caught in PR 42823 because of how we invoke the
git_pillar code. Firstly, the "pillar" argument needed to stay. This is
because even though we're not using it, _external_pillar_data() is still
passing it now that git_pillar is not specially invoked there.
Secondly, since the input comes in as a list, and _external_pillar_data
uses single-asterisk expansion, the repos are passed separately when
they should be passed as a single list. To fix these issues, I've done
the following:
1. Re-introduced the "pillar" argument in git_pillar's ext_pillar
function.
2. Changed the "pillar" variable to avoid confusion with the (unused)
"pillar" argument being passed in.
3. Instead of git_pillar accepting the repos as a list, the ext_pillar
function now uses single-asterisk expansion to make it conform with
how _external_pillar_data() invokes it.
This PR is part of what will be an ongoing effort to use explicit
unicode strings in Salt. Because Python 3 does not suport Python 2's raw
unicode string syntax (i.e. `ur'\d+'`), we must use
`salt.utils.locales.sdecode()` to ensure that the raw string is unicode.
However, because of how `salt/utils/__init__.py` has evolved into the
hulking monstrosity it is today, this means importing a large module in
places where it is not needed, which could negatively impact
performance. For this reason, this PR also breaks out some of the
functions from `salt/utils/__init__.py` into new/existing modules under
`salt/utils/`. The long term goal will be that the modules within this
directory do not depend on importing `salt.utils`.
A summary of the changes in this PR is as follows:
* Moves the following functions from `salt.utils` to new locations
(including a deprecation warning if invoked from `salt.utils`):
`to_bytes`, `to_str`, `to_unicode`, `str_to_num`, `is_quoted`,
`dequote`, `is_hex`, `is_bin_str`, `rand_string`,
`contains_whitespace`, `clean_kwargs`, `invalid_kwargs`, `which`,
`which_bin`, `path_join`, `shlex_split`, `rand_str`, `is_windows`,
`is_proxy`, `is_linux`, `is_darwin`, `is_sunos`, `is_smartos`,
`is_smartos_globalzone`, `is_smartos_zone`, `is_freebsd`, `is_netbsd`,
`is_openbsd`, `is_aix`
* Moves the functions already deprecated by @rallytime to the bottom of
`salt/utils/__init__.py` for better organization, so we can keep the
deprecated ones separate from the ones yet to be deprecated as we
continue to break up `salt.utils`
* Updates `salt/*.py` and all files under `salt/client/` to use explicit
unicode string literals.
* Gets rid of implicit imports of `salt.utils` (e.g. `from salt.utils
import foo` becomes `import salt.utils.foo as foo`).
* Renames the `test.rand_str` function to `test.random_hash` to more
accurately reflect what it does
* Modifies `salt.utils.stringutils.random()` (née `salt.utils.rand_string()`)
such that it returns a string matching the passed size. Previously
this function would get `size` bytes from `os.urandom()`,
base64-encode it, and return the result, which would in most cases not
be equal to the passed size.
This function is used identically in every cloud provider test file. Let's add
it to a more central place and make it more DRY. Might be useful in other testing
places as well.
test.support.mock.mock_open specifies a side effect so that if you constantly
read a mocked open call, it will only iterate through it once, and then after
it will appear as if the end of the file has been reached.
This is needed for salt.modules.cp.push to be tested correctly.
If this is has any unicode characters in it, it won't load on systems that do
not default to a unicode locale.
find . -type f | while read line; do ret=$(file $line); if [[ $ret == *UTF-8* && $line == *.py ]]; then echo $line; fi; done
The above will list all files that have unicode characters in it and won't load
with locale set to C or POSIX
The location of the git-http-backend is within /usr/lib instead of
/usr/libexec.
This also uncomments a line that was commented out for troubleshooting
purposes.
For some reason these were not failing when I opened #40777, but now
that the PR is merged are failing for PR builds (as well as locally in
my test env). This fixes those failures.
This further abstracts some of the setup and teardown code so it can be
used for git-over-http tests.
It also moves the code that was originally added to the archive
state integration tests to create a local http server into
salt.support.helpers so that it can be more easily and portably used.
Allows patching more than one loader module.
Allows auto-loading the minion functions which will get namespaced with
the globals used to patch the loader module(s).
This avoids tracebacks when daemonizing code which is running under the XMLRunner:
```
23:22:46 Traceback (most recent call last):
23:22:47 File "/testing/salt/utils/process.py", line 644, in _run
23:22:47 return self._original_run()
23:22:47 File "/usr/lib64/python3.4/multiprocessing/process.py", line 93, in run
23:22:47 self._target(*self._args, **self._kwargs)
23:22:47 File "/testing/salt/client/mixins.py", line 464, in _proc_function
23:22:47 salt.utils.daemonize()
23:22:47 File "/testing/salt/utils/__init__.py", line 502, in daemonize
23:22:47 os.dup2(dev_null.fileno(), sys.stdout.fileno())
23:22:47 io.UnsupportedOperation: fileno
23:22:47 Process SignalHandlingMultiprocessingProcess-2:
23:22:47 Traceback (most recent call last):
23:22:47 File "/usr/lib64/python3.4/multiprocessing/process.py", line 254, in _bootstrap
23:22:47 self.run()
23:22:47 File "/testing/salt/utils/process.py", line 644, in _run
23:22:47 return self._original_run()
23:22:47 File "/usr/lib64/python3.4/multiprocessing/process.py", line 93, in run
23:22:47 self._target(*self._args, **self._kwargs)
23:22:47 File "/testing/salt/client/mixins.py", line 464, in _proc_function
23:22:47 salt.utils.daemonize()
23:22:47 File "/testing/salt/utils/__init__.py", line 502, in daemonize
23:22:47 os.dup2(dev_null.fileno(), sys.stdout.fileno())
23:22:47 io.UnsupportedOperation: fileno
```
We just keep a record of all the test case class attributes prior to
running the test and then just delete it afterwards.
We also issue a warning log message to tell the users how to cleanup
such references.
